How do I clean my vape coils?
The first step is to remove excess oil/build up from the coil/atomizer, all you need is a paper towel! Flip your pen upside down and heat it so that the oil starts to drip out and onto the paper towel.
Do this repeatedly until the excess oil has dripped out and the chamber is mostly clean. Allow the chamber to cool for a few minutes. Drip a very small amount of isopropyl alcohol into your coil/atomizer and heat your pen to burn off the isopropyl alcohol. Don’t use other cleaning solutions as they are made up of different chemicals and isopropyl will evaporate quickly.
If your coil is exceptionally dirty, feel free to repeat the isopropyl step and use a cotton swab to very gently clean out your coil/atomizer. Make sure to be gentle as you don’t want to damage the heating element! Before use, heat the pen on the highest heat setting to make sure all isopropyl alcohol has been removed. Voila!
Make sure that your unit is completely dry before reusing. Also, make sure air holes in atomizer are clear before using. You can gently use a toothpick or a cotton swab, but be very careful to avoid touching your coils as you do not want to bend them. DO NOT soak overnight because the outside chamber coating could peel.